S2XNearfield Monitor
Archived Product
Gallery
This is the front view.
This is the back view.
The SX Panel.
Features & Benefits
Product Feature | Benefit to the customer |
|---|---|
| X-ART tweeter, handmade in Berlin |
|
| The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane | Direct, fast response in the high-range even with complex transients |
| Ultra-light but extremely dimensionally stable woofer material (HexaCone) | Excellent transient response even at high sound levels without breakup of the diaphragm |
| Vertical 2-way system with 7.5” woofer | High resolution of the stereo image |
| Spacious bass reflex ports on the front |
|
| Highly efficient PWM amplifier for the woofer coupled with an A/B amplifier for X-ART tweeter | Low-distortion amplification at both low and high volume levels |
| Linear frequency response of 35 Hz to 50 kHz | Unbiased reproduction in a wide frequency band |
| Maximum peak sound pressure per pair in 1 m ≥ 120 dB | Powerful, compression-free sound reproduction even at very high sound levels |
| Room acoustic adjustments via the SX Panel | Allows optimal adaptation to acoustically difficult listening environments or individual preferences |
| Analog XLR input | Optimized for balanced line signals |
| Acoustically optimized cabinet geometry | Reduction of unwanted reflections on the cabinets |
| Directional sound radiation in vertical plane | Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc. |
| 2 years warranty with optional extension to 3 years with the registration of the product | Full repair service if required for 5 years |
Technical Data
Woofer
| Number | 1 |
| Basket Ø | 7.5" (186 mm) |
| Voice Coil Ø | 2" (50 mm) |
| Cone Material | HexaCone |
Tweeter
| Number | 1 |
| Type | X-ART |
| Diaphragm Area | 4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø | 2" (56 mm) |
| Velocity Transform Ratio | 4:1 |
| Diaphragm Weight | 0.17 g |
Built-in Amplifiers
| Woofer | 1 |
| Type | PWM |
| Amp. Power RMS / Music | 250 W / 350 W |
| Tweeter | 1 |
| Type | A/B |
| Amp. Power RMS / Music | 50 W / 100 W |
Control Panel
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) |
| Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) |
| EQ 80 Hz | 0 to +6 dB (1 dB steps) |
| High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) |
| Low Shelf EQ < 150 Hz | ±4 dB (1 dB steps) |
| Tweeter Gain | ±2 dB (0.5 dB steps) |
Input Connectors
| Analog | XLR |
| Digital (optional) | AES/EBU / SPDIF / word clock |
General Data
| Frequency Response | 35 Hz - 50 kHz |
| THD > 80 Hz | ≤0.8 % |
| Max. SPL with sine wave acoustic 100 Hz to 3 kHz at 1 m | ≥110 dB |
| Max. SPL per pair at 1 m | ≥120 dB |
| Crossover Frequencies | 2200 Hz |
| Input Impedance | 10 kOhm |
| Panel | Front |
| Weight | 23.8 lb (10.8 kg) |
| Magnetically Shielded | No |
| Height x Width x Depth | 14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm) |
| Warranty | 5 years (2 years warranty plus 3 years optional with product registration) |
| Delivery Contents | Power cord, manual |
